2019-08-22 10:49:52 4057瀏覽
本篇文章扣丁學堂php培訓小編主要是給讀者們分享一下php與nginx的處理方式及nginx與php-fpm通信的兩種方式,廢話不多說了,下面就一起來了解一下吧。
先給大家介紹下php與nginx 的兩種處理方式,具體內容如下所示:
1、IP:Port 監聽方式
php-fpm docker pull PHP:2.4-alpine nginx.conf fastcgi_pass 127.0.0.1:9000;
php-fpm 在容器里的 nginx.conf
location /php { proxy_set_header Host $host:$server_port; proxy_pass http://138.38.38.111:80/; }
2、UDS 方式監聽
php-fpm listen = /tmp/php-fpm.sock nginx.conf fastcgi_pass unix:/tmp/php-fpm.sock;
3、注意
php-fpm用ip:port方式建立鏈接,
nginx不要用unix socket方式建立鏈接,用ip:port方式建立連接就行
下面看下nginx與php-fpm通信的兩種方式
在linux中,nginx服務器和php-fpm可以通過tcp socket和unix socket兩種方式實現。
unix socket是一種終端,可以使同一臺操作系統上的兩個或多個進程進行數據通信。這種方式需要再nginx配置文件中填寫php-fpm的pid文件位置,效率要比tcp socket高。
tcp socket的優點是可以跨服務器,當nginx和php-fpm不在同一臺機器上時,只能使用這種方式。
windows系統只能使用tcp socket的通信方式。
配置方法
tcp socket
tcp socket通信方式,需要在nginx配置文件中填寫php-fpm運行的ip地址和端口號。
location ~ \.php$ { include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; }
unix socket
unix socket通信方式,需要在nginx配置文件中填寫php-fpm運行的pid文件地址。
location ~ \.php$ { include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; }
php-fpm的運行端口號和socket文件的地址都是在php-fpm.conf中配置的。
php-fpm.conf文件在php安裝文件的/etc目錄下,
比如你的php安裝在/opt/php目錄,則應該是/opt/php/php-fpm.conf。
; The address on which to accept FastCGI requests. ; Valid syntaxes are: ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on ; a specific port; ; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on ; a specific port; ; 'port' - to listen on a TCP socket to all IPv4 addresses on a ; specific port; ; '[::]:port' - to listen on a TCP socket to all addresses ; (IPv6 and IPv4-mapped) on a specific port; ; '/path/to/unix/socket' - to listen on a unix socket. ; Note: This value is mandatory. listen = 127.0.0.1:9000 listen = /var/run/php-fpm.sock
通過注釋可以看到,php-fpm的listen指令可以通過五種方式處理FastCGI請求,分別是:
1. ipv4:端口號
2. ipv6:端口號
3. port相當于 0.0.0.0:port,本機所有ipv4對應的端口號
4. [::]:port,包括ipv4和ipv6
5. unix socket文件
直接配置使用unix socket文件之后,會遇到access deny的問題,由于socket文件本質上還是一個文件,存在權限控制問題,默認由root用戶創建,因此nginx進程無權限訪問,應該配置如下命令:
; Set permissions for unix socket, if one is used. In Linux, read/write ; permissions must be set in order to allow connections from a web server. Many ; BSD-derived systems allow connections regardless of permissions. ; Default Values: user and group are set as the running user ; mode is set to 0660 listen.owner = www listen.group = www listen.mode = 0660
可以配置nginx和php-fpm都是用www用戶,這樣就不會存在權限問題,當然也可以創建不同的用戶,然后加入同一個組,便于分配權限。
想要了解更多關于PHP開發方面內容的小伙伴,請關注扣丁學堂PHP培訓官網、微信等平臺,扣丁學堂IT職業在線學習教育有專業的PHP講師為您指導,此外扣丁學堂老師精心推出的PHP視頻教程定能讓你快速掌握PHP從入門到精通開發實戰技能。扣丁學堂PHP技術交流群:374332265。
【關注微信公眾號獲取更多學習資料】 【掃碼進入Python全棧開發免費公開課】